Case study: Supply chain scenarios in a plastic container company
DOI:
https://doi.org/10.21640/ns.v10i20.1155Keywords:
System dynamics, plastic containers, supply chain scenariosAbstract
Introducción: The supply chain is an underestimated issue in small and medium enterprises; it is assumed that its only purpose is to save on operating costs and this is not necessarily the case. It is imperative to recognize that not all customers are equal, as each has different requirements for their products and delivery of same to their final customers, and it is therefore important to consider all the factors that influence that outcome. The case study was developed in a company producing plastic containers in Cd. Obregon, Sonora. The study has selected the manufacture of the 737 gr salt container from resin, as this is a product demanded by one of its three main customers. The problem in the plant was the number of salt containers to be produced with different production policies, generating three scenarios.
Método: To respond to the problem, a study of the entire production process associated with the links in the supply and distribution was conducted based on the methodology of system dynamics to evaluate each of the variables and parameters included in the links in the supply chain via a simulation.
Resultados: The results show three different scenarios that are executed through an interface with the user, allowing to observe the behavior of the profits, the sales of finished product and the use of the resin in the manufacture of bottles of 737 gr for a company that manufactures and distributes salt proposals were validated by drawing upon the judgment of experts on the subject and the experience of employees, as well as the actual data of the company
Discusión o Conclusión: The findings reveal different modes of behavior of four critical variables in the process: profits, sales, the finished products warehouse, and resin use. The simulation was performed with the use of Stella ® 10.1.2 software, trying different policies and considering delay and initial inventory theories in processes and final products for the three different proposed scenarios derived from this study to interested parties (employers and customers); the case study was developed within the context of the National Center for Innovation in Intermodal Transportation and Logistics of Mexico.Downloads
References
Aracil, J., & Gordillo, F. (1997). Dinamica de Sistemas. Madrid: Alianza Editorial.
Aracil, J. (1995). Dinámica de sistemas, Madrid: Alianza Editorial.
Arvis, J., Savslasky, D., Ojala, L., Shepherd, B., Busch, C., & Raj, A. (2014). Connecting to compete 2014, trade logistics in the glogal economy. The World Bank. Washington DC: The World Bank.
Ballou, R. H. (2004). Logística: administración de la cadena de suministro. México: PEARSON.
Bertalanffy, L. (1968). General Systems Theory. Development and Applications. George Braziller, New York
Blancard, B (1995). Ingeniería en logística. Isdefe, Ingeniería de Sistemas, Madrid España.
Bojali, J. A. (2011). Consultores internacionales, S.C.
Bueno-Solano, A. , Cedillo-Campos, M., 2012. Dynamic impact on global supply chains performance
of disruptions propagation produced by terrorist acts. Transportation Research Part E 61 (2014) 1–12
Cedillo-Campos, M., Sanchez, C., 2013. Dynamic self-assessment of supply chains performance: an emerging market approach. Journal of Applied Research and Technology 11 (3), 338–347.
Cervantes, A., Chiappa, X., & Simoes, N. (2007). Manual práctico de Stella ®, software de modelación dinámica. Recuperado el 19 de Octubre de 2014, de http://190.254.1.202/ingenieria/DCTOS_SIMULACION/manual_ithink.pdf
Crone, S. (s/f). Distribución y logística. Recuperado el 2014, de http://www.distribucion-y-logistica.com/logistica/definiciones/logistica-definicion.html
Chapra, S., Canale, R. (2007) Métodos Numéricos para Ingenieros, Editorial MacGraw-Hill, Interamericana, 5ta Edición, Mexico. Recuperado el 18 de mayo de 2016. http://es.slideshare.net/mikebsd/mtodos-numricos-para-ingenieros-5ta-ed-chapra
Forrester, J. (1981). Dinámica industrial. Buenos Aires, Argentina: El ateneo.
Görlitz, P., & MacDougall, W. (2013). Industry Overview, The Plastics Industry in Germany. Germany Trade & Invest, Berlin, Germany
INEGI (2015). Producto Interno Bruto durante el cuarto trimestre de 2015, cifras desestacionalizadas Recuperado el 10 de junio de 2016, http://www.inegi.org.mx/saladeprensa/boletines/2016/pib_pconst/pib_pconst2016_02.pdf
INEGI (2011). micro, pequeña, mediana y gran empresa. Estratificación de los establecimientos. Recuperado el 20 de enero de 2013.
Infoisinfo (2016). Envases de plástico en Sonora. Recuperado el 14 de junio de 2016. http://sonora estado.infoisinfo.com.mx/busqueda/envases_de_plastico
Iñaki, C. (2010). Obtenido de
http://www.ehu.es/i.morlan/tesis/memoria/TesisIMcompleta.pdf
Lagarda, E. (2012) Propuesta metodológica de planeación estratégica bajo un enfoque de modelación dinámica y por escenarios. ITSON, México.
Lagarda-Leyva, E., Castañeda-Rodríguez, G., & Soto-Fierro, I. (2016). Strategic Plan for a Processed Foods Company Using Megaplanning and Balanced Scorecard, Performance Improvement Quarterly, Pp. 27-54
Lagarda, E., Coronado, E., Portugal, J., & Cinco, J. (2013). Grupo Latinoamericano de Dinámica de Sistemas. Recuperado el 4 de 5 de 2014, de XI Congreso Latinoamericano de Dinámica de Sistemas: http://www.onceclads.com
Landazuri, Y., Chávez, M., & Ochoa, B. (2013). Perfil Administrativo y financiero de las Micro y Pequeñas Empresas en el Municipio de Cajeme, Sonora. XVIII Congreso Internacional de Contaduría, Administración e Informática. México, D. F.: ANFECA.
Millán, J., & Millán, M. (6 de Junio de 2011). Consultores internacionales. Recuperado el 19 de Septiembre de 2014, de http://www.consultoresinternacionales.com/publicaciones/ciscomentario/510/CISComentarioNo510.pdf
Ogilvy, J. (2006). Education in the information age:scenarios, equality and equaly. Barkeley, CA, USA: GBN.
Paredes, D. (2015). Perspectivas para la Industria del Plástico: Foro Anipac, Mundo Plástico. Recuperado el 11 de junio de 2016, https://issuu.com/revistamundoplastico/docs/mundoplastico72issue
ProMéxico (2014). Oportuniades de negocio para proveedores de plástico en México. Recuperado el 14 de junio de 2016. http://www.promexico.gob.mx/proveedores/oportunidades-de-negocio-para-proveedores-de-plastico-en-mexico.html
Ramírez, S. (2010). Modelización de una cadena de abastecimiento (supply chain) para el sectror textil-confeccion en el entorno colombiano. Universida Nacional de Colombia, Facultad de Minas. Medellín: UNC.
Sandoval & Moreno. (01 de Noviembre de 2011). Almacenamientolog. Recuperado el 05 de octubre de 2014, de http://cristiandavid05200.wix.com/logistica#!almacenamiento/cvxo
Schwartz, P. (1991). The art of the long view, planning for the future in an uncertain world. New York, NY, USA: Currency Doubleday.
Sterman, J. (2000). Business dynamics: Systems thinking and modeling for a complex world. Irwin McGraw-Hill.
Taha, H. (2004). Investigacion de operaciones. Mexico: PEARSON EDUCACION.
Tseng, Y., Wang, W., & Weiyang, M. (2012). A System Dynamics Model of Evolving Supply Chain Relationships and Inter-firm Trust. Tunghai University, Taiwan, Business Administration. Massachussetts: System Dynamics.
Roberts, E.B. (1978). Managerial Applications of System Dynamics. Productivity Press, Cambridge, MA.
Santos Ramírez, Leopoldo. (2004). Matrimonios de anglos y mexicanos en la frontera. Her
mosillo: El Colegio de Sonora.
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Nova Scientia
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Conditions for the freedom of publication: the journal, due to its scientific nature, must not have political or institutional undertones to groups that are foreign to the original objective of the same, or its mission, so that there is no censorship derived from the rigorous ruling process.
Due to this, the contents of the articles will be the responsibility of the authors, and once published, the considerations made to the same will be sent to the authors so that they resolve any possible controversies regarding their work.
The complete or partial reproduction of the work is authorized as long as the source is cited.